Configures the user credentials to connect to an S3 on-prem storage.
The S3 on-prem integration on the File Protect appliance uses the NetApp StorageGRID service to store and secure files. The File Protect appliance scans the files in the S3 on-prem storage for malware and quarantines the files marked as malicious. You can configure the location to quarantine these files.
Note
The Access key and Secret access key are set in the S3 on-prem storage host. The storage administrator has the permission to set these keys in the host platform.
Syntax
fmps s3-onprem config access-id <accessIDKey>
fmps s3-onprem config secret <secretKey>
fmps s3-onprem config hostname <hostName>
fmps s3-onprem config port <port>
Parameters
<accessIDKey>
Access ID key retrieved from the S3 on-prem storage host.
<secretKey>
Secret key retrieved from the S3 on-prem storage host.
<hostName>
The host IP address where the S3 on-prem storage is maintained.
<port>
The port number on which the S3 APIs are enabled on the S3 on-prem storage.
Example
The following example configures the access ID key retrieved from the S3 on-prem storage host.
hostname (config) # fmps s3-onprem config access-id 5RTYED3R4DSDFTR4F hostname (config) #
User role
Administrator
Command mode
Configuration
Supported appliances
This command is supported on the following appliances running the specified releases or later:
File Protect: Release 10.0.2