Shows the configured user credentials that are required to connect to an S3 on-prem storage.
Syntax
show fmps s3-onprem config
Parameters
None
Output fields
The following table describes the output fields for the show fmps s3-onprem config command. Fields are listed in the approximate order in which they appear in the output.
Field | Description |
|---|---|
Hostname | The host IP address where the S3 on-prem storage is maintained. |
Port | The port number on which the S3 APIs are enabled on the S3 on-prem storage. Make sure you enter a port value supporting HTTPS. HTTP ports are not supported. |
Shared Access Key | Access ID key retrieved from the S3 on-prem storage host. |
Example
The following example displays the configured user credentials for an S3 on-prem storage.
hostname (config) # show fmps s3-onprem config S3 On-Prem Configuration Hostname: 165.10.13.12 Port: 6545 Shared Access Key: 5RTYED3R4DSDFTR4F
User role
Monitor, Analyst, Operator, or Admin
Command mode
Enable
Supported appliances
This command is supported on the following appliances running the specified releases or later:
File Protect: Release 10.0.2