Disables NTP authentication on the specified NTP server. This command must be executed before you can remove an authentication key that is mapped to this server from the system.
Syntax
no ntp server <server> authentication
Parameters
server
The hostname or the IPv4 or IPv6 address of the NTP server.
Example
The following example disables authentication on NTP server 172.16.3.4.
hostname (config) # no ntp server 172.16.3.4 authentication
User role
Admin
Command mode
Config
Supported appliances
This command was released as follows:
Email Security — Server: Release 7.8.0
Network Security: Release 7.9
Central Management System: Release 7.9
Intelligent Virtual Execution - Server: Release 7.9