Maps an NTP authentication key to an NTP peer.
Syntax
ntp peer <peer> authentication key <number>
Parameters
peer
The hostname or the IPv4 or IPv6 address of the NTP peer.
number
The key ID, which is an integer from 1-16.
Example
The following example maps the key with the ID of 12 to the 10.2.2.2 NTP peer.
hostname (config) # ntp peer 10.2.2.2 authentication key 12 hostname (config) # show ntp configured NTP enabled: yes NTP Authentication enabled: yes NTP peer 10.2.2.2 Enabled: yes NTP version: 4 Key: 12 ...
Command mode
Config
Supported appliances
This command was released as follows:
Email Security — Server: Release 7.8.0
Network Security: Release 7.9
Central Management System: Release 7.9
Intelligent Virtual Execution - Server: Release 7.9