Displays the full settings and status for all managed appliances that are related to the management and control of appliances by the Central Management System appliance.
Note
The Central Management Console (CMC) is the Central Management System appliance component that provides basic management and control capabilities for both the server (Central Management System appliance) and its clients (managed appliances).
Syntax
show cmc appliances <applianceName>
show cmc appliances [brief | detail]
Parameters
<applianceName>
(Central Management System appliance only) Specified name for the appliance.
brief
(Central Management System appliance only) Shows a brief summary of each managed appliance.
detail
(Central Management System appliance only) Shows a full summary of each managed appliance.
Examples
The following example displays the status of each appliance that can be managed by this Central Management System appliance. In this case, the Network Security appliance initiated the request to be managed, the Email Security — Server appliance is not currently connected, and the Central Management System appliance initiated the connection between itself and the Intelligent Virtual Execution - Server appliance.
hostname # show cmc appliances Appliance nx-02: Address: 172.70.1.1 Enabled: yes Connected: yes (client-initiated) Status check OK: yes Version compatible: yes Appliance ex-03: Address: 172.30.1.1 Enabled: yes Connected: no Status check OK: no Version compatible: unknown Appliance fx-04: Address: 172.20.1.1 Enabled: yes Connected: yes (server-initiated) Status check OK: no Version compatible: yes
The following example displays the status and settings for the nx-02 appliance. The (Acme_Pair2) designation indicates that the appliance is a member of the Acme_Pair2 Network Security High Availability (HA) pair. The Connected: line indicates that the Central Management System appliance initiated the connection with the appliance.
hostname # show cmc appliances nx-02 Appliance nx-02: (Acme_Pair2) Connection status: Connected: yes (server-initiated) Connection failure reason: None Connection broken reason: None Connection last formed: 2015/12/18 21:13:37 Connection last broken: 2015/12/18 21:13:36 Last connection attempt: 2015/12/18 21:13:36 Next connection attempt: Current time: 2015/12/18 23:50:03 Status check OK: yes Server username on client: admin Client username on server: cmcclient Appliance Status: Client software version: wMPS (wMPS) 7.8.0.297262 Client software match: no Client software compatible: yes Appliance ID: 002590AEE884 Product model: FireEye9450 Content version: 432.198 ...
The following example shows that three appliances are enabled for Central Management System management. One appliance is disconnected, and two appliances failed status checks.
hostname # show cmc appliances brief Appliance Address Enabled Connected Health Product --------- ------- ------- --------- ------ ------ ex-03 172.30.1.1 yes no CRIT eMPS nx-02 172.70.1.1 yes yes ok wMPS fx-04 172.20.1.1 yes yes WARN fMPS
Note
The
show cmc appliances detailcommand output is the same as theshow cmc appliances <applianceID>command output, except it displays information about all managed appliances, not just one.
User role
Admin, Monitor, or Operator
Command mode
Enable
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Central Management System: Before Release 7.5.