show cmc client

Displays information about how managed appliances connect to and authenticate with the Central Management System appliance.

Note

The Central Management Console (CMC) is the Central Management System appliance component that provides basic management and control capabilities for both the server (Central Management System appliance) and its clients (managed appliances).

Syntax

show cmc client

Parameters

None

Example

The following example displays CMC information about the managed appliances from the Network Security appliance.

hostname # show cmc client
CMC client enabled: yes

CMC server connection status:
   Connected:                 yes
   CMC server hostname:       cm-01
   CMC server IP address:     172.10.1.1 
   Last connection failure:   None
   Last connection breakage:  None
   Connection last formed:    2014/12/23 21:13:37
   Connection last broken:    2014/12/23 21:13:36
   Last connection attempt:   2014/12/23 21:13:36
   Next connection attempt:   
   Current time:              2014/12/26 19:03:55
   Client username on server: admin
   Server username on client: admin

Configuration for client-initiated connections:
   Server address:                172.10.1.1   
   Server port:                   22
   Auto-connect:                  yes
   Username for server requests:  admin
   
  Authentication:
      Authentication type: password
      password username: admin
      password password: ********
      ssh-dsa2 username: cmcclient
      ssh-dsa2 identity:
      ssh-rsa2 username: cmcclient
      ssh-rsa2 identity:

General CMC client configuration:
   Transmit bandwidth limit:           unlimited
   Confirm configuration if managed:   yes

Validation for server-initiated connections:
   Source address:   (same as main address)
   Source port:      (no restriction)
   Require match:    no

User role

Admin, Monitor, or Operator

Command mode

Enable

Supported appliances

This command is supported on the following appliances running the specified releases or later: