Displays the configuration of the live ether1 or ether2 interface and the optional HTTP proxy server settings used to access the Internet. If URL Dynamic Analysis is enabled, the appliance uses the live ether1 or ether2 interface to retrieve remote objects in a controlled live analysis mode.
This command also shows the amount of time that the appliance waits to download the object or respond to a download and submit it to the virtual machine for further analysis before a timeout occurs.
Important
URL Dynamic Analysis is disabled by default. Do not enable URL Dynamic Analysis until you have validated end-to-end connectivity between the live ether1 or ether2 interface and the Internet.
Note
URL Dynamic Analysis is also called Dynamic URL Analysis or DUA.
Syntax
show email-analysis url-dynamic-analysis
Parameters
None
Output fields
The following table describes the output fields for the show email-analysis url-dynamic-analysis command. Fields are listed in the approximate order in which they appear in the output.
Field | Description |
|---|---|
Live Interface | Name of the live ether1 or ether2 data interface. |
Feature Enabled | Status for URL Dynamic Analysis. |
Default Gateway | IPv4 address of the node used by the live ether1 or ether2 interface to access the Internet default gateway. This node serves as the Internet access point for the live ether1 or ether2 interface. |
External IP | External IPv4 address and subnet mask of the live ether1 or ether2 interface. |
Name Server | IPv4 address of the Domain Name System (DNS) name server used for the live ether1 or ether2 interface. |
Http Proxy | Fully qualified domain name (FQDN) or IPv4 address and port number of the node acting as the HTTP proxy server for the live ether1 or ether2 interface. |
Http Proxy Authentication | Credentials used to authenticate the user and permit access to the HTTP proxy server. |
Download Complete Timeout (sec) | Number of seconds after which the appliance completes downloading the object from the referenced URL. |
Download Response Timeout (sec) | Number of seconds after which the appliance responds to downloading the object from the referenced URL. |
Download Disable Timeout (sec) | Number of seconds after which the appliance stops downloading the object from the referenced URL. |
Example
The following example displays the status for URL Dynamic Analysis, configuration of the live ether1 or ether2 interface, the optional proxy server settings, and the amount of time to wait before a timeout occurs.
hostname # show email-analysis url-dynamic-analysis Email-Analysis url dynamic analysis configuration: Live Interface: ether2 Feature Enabled: yes Default Gateway: 172.16.1.1 External IP: 172.16.0.0/12 Internal IP: 169.254.100.1/24 Name Server: 172.16.2.1 Http Proxy: 10.10.10.5:8080 Http Proxy Authentication: admin/******** Download Complete Timeout (sec): 120 Download Response Timeout (sec): 30 Download Disable Time (sec): 1500
User role
Admin, Analyst, Operator, or Monitor
Command mode
Enable
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Email Security — Server: Before Release 7.5. Command output was enhanced to include the authentication settings for the HTTP proxy server in Release 7.8.0. Support for the fully qualified domain name was added in Release 7.9. Support for the live ether1 interface was added in Release 8.0.