show fenet update status cluster ＜cluster name＞ {brief | detail}

Shows the status of a cluster's upgrade.

Syntax

show fenet update status cluster <cluster name> brief

show fenet update status cluster <cluster name> detail

Parameters

cluster name

The name of the cluster.

Examples

The following example shows the brief status of the Cluster-Acme upgrade.

hostname > show fenet update status cluster Cluster-Acme brief
Cluster Update Status:
Name                Operation                 Percent   Status
----                ---------                 -------   ------
Cluster-Acme        image-update              100.00    complete
Node                Task
----                ----
vx-2                07/07  image-reboot       100.00    complete
vx-1                07/07  image-reboot       100.00    complete
 

The following example shows the detailed status of the Cluster-Acme upgrade.

hostname > show fenet update status cluster Cluster-Acme detail
Cluster Update Status:
Cluster:                       Cluster-Acme
Status:                        complete
Current operation:             image-update
Current task:                  image-reboot
Percent done:                  100.00 %
Percent complete:              100.00 %
Current num nodes:             2
Total num nodes:               2
Version:
Last updated at:               2016/07/18 19:22:56.424
Last updated op:               image-update
Start time:                    2016/07/18 18:58:33.168
End time:                      2016/07/18 19:22:56.424
Node:                          vx-2
Status:                        complete
Percent done:                  100.00 %
Percent complete:              100.00 %
Task (01/07):                  image-check
Status:                        complete
Percent done:                  100.00 %
Retry count:                   0
Return code:                   0
Start time:                    2016/07/18 18:58:33.174
End time:                      2016/07/18 18:58:43.331
Return message:
Operation initiated in the background.
Run 'show fenet image status' for status
Task (02/07):                  image-fetch
Status:                        complete
Percent done:                  100.00 %
Retry count:                   0
Return code:                   0
Start time:                    2016/07/18 18:58:43.461
End time:                      2016/07/18 18:59:23.833
Return message:
...

User role

Admin, Operator, or Monitor

Command mode

Standard

Supported appliances

This command is supported on the following appliances running the specified releases or later: