Displays all dynamic and static routes in the IPv6 routing table.
Syntax
show ipv6 route
Parameters
None
Output fields
The following table describes the output fields for the show ipv6 route command. Fields are listed in the approximate order in which they appear in the output.
Field | Description |
|---|---|
Gateway | IPv6 address of the default router or next-hop device. |
Interface | Name of the appliance interface. |
Source | Source that is assigned to the interface. |
Example
The following example shows all static and dynamic IPv6 routes.
hostname > # show ipv6 route
Destination prefix
Gateway Interface Source ------------------------------------------------------------------------------------ ::1/128:: lo local 2001:470:84a7:1720::/64:: pether3 interface 2001:470:84a7:1720:225:90ff:fef3:2476/128:: lo local
User role
Admin, Analyst, Operator, or Monitor
Command mode
Enable
Supported appliances
This command was released as follows:
Email Security — Server: Before Release 7.6
Network Security: Before Release 7.6
Central Management System: Before Release 7.6
File Protect: Before Release 7.5
Malware Analysis: Before Release 7.4
Endpoint Security (HX): Release 2.5