Displays all static and dynamic routes in the routing table, only the static routes, or only the active or static default gateway.
Syntax
show ip {route [static] | default-gateway [static] | dhcp}
Parameters
route [static]
Displays all static and dynamic IP routes, or only static routes.
default-gateway [static]
Displays the active default gateway, or the manually-defined (static) default gateway.
dhcp
Displays DHCP-related configuration information.
Example
The following example shows all IP routes.
hostname # show ip route Destination Mask Gateway Interface Source default 0.0.0.0 172.16.1.1 ether1 static 172.16.0.0 255.240.0.0 0.0.0.0 ether1 interface
Supported appliances
This command was released as follows:
Endpoint Security (HX): Release 2.5
Network Security: Release 9.0