show mvx cluster enrollment status

Displays a sensor's MVX cluster enrollment status.

Syntax

show mvx cluster enrollment status

Parameters

None

Example

The following example displays the output of the show mvx cluster enrollment status command:

nx-1 (config # show mvx cluster enrollment status

MVX Cluster Enrollment Status

  Enrollment Client :
    Status ok               : yes
    Status description      : enrolled
    Last checked at         : 2016/07/28 20:51:03

  Enrollment Service :
    Auto enabled            : yes
    Service address         : CMS (engtest@10.11.121.13 : singleport)
    Preferred cluster       : any (less loaded)

  Broker Info :
    Cluster Name            : Cluster-Acme
    Broker Name             : vx-1
    Broker ID               : 002590F4EE38
    Broker Address          : 10.11.121.12
    Broker State            : Connected
    Failure Reason          : None
    Last Connection Attempt : 2016/07/20 18:15:14
    Connection Last Formed  : 2016/07/20 18:15:14
    Connection Last Broken  :

User role

Admin, Operator, Monitor, or Analyst

Command mode

Enable

Supported appliances

This command is supported on the following appliances running the specified releases or later: