Displays network statistics for the specified interface.
Syntax
show network stats interface <InterfaceName>
Parameters
interfaceName
Name of the interface
Examples
The following example displays the network statistical information for the pether10 interface:
hostname (config) # show network stats interface pether10 <number of packets(packet %age)>/<number of bytes> (GiB, byte %age) Total : 4/351 (0.000 GiB) Error : 0/0 (0.000 GiB) Non-Ethernet : 0/0 (0.000 GiB) VLAN Tagged : 0/0 (0.000 GiB) QinQ : 0/0 (0.000 GiB) Ethernet : 4/351 (0.000 GiB) Other IP : 1/60 (0.000 GiB) ARP : 1/60 (0.000 GiB) Others : 0/0 (0.000 GiB) IPv4 : 3/291 (0.000 GiB) [Fragments: 0/0 (0.000 GiB)] IPv6 : 0/0 (0.000 GiB) [Fragments: 0/0 (0.000 GiB)] Ignored : 0 (0.00%)/0 (0.000 GiB, 0.00%) TCP : 3 (75.00%)/291 (0.000 GiB, 82.91%) HTTP : 1 (25.00%)/85 (0.000 GiB, 24.22%) HTTPS : 0 (0.00%)/0 (0.000 GiB, 0.00%) SSH : 0 (0.00%)/0 (0.000 GiB, 0.00%) SMTP : 0 (0.00%)/0 (0.000 GiB, 0.00%) POP : 0 (0.00%)/0 (0.000 GiB, 0.00%) IMAP : 0 (0.00%)/0 (0.000 GiB, 0.00%) SMB : 0 (0.00%)/0 (0.000 GiB, 0.00%) RPC : 0 (0.00%)/0 (0.000 GiB, 0.00%) UDP : 0 (0.00%)/0 (0.000 GiB, 0.00%) DNS : 0 (0.00%)/0 (0.000 GiB, 0.00%) ICMP : 0 (0.00%)/0 (0.000 GiB, 0.00%) ICMPv6 : 0 (0.00%)/0 (0.000 GiB, 0.00%) EIGRP : 0 (0.00%)/0 (0.000 GiB, 0.00%) OSPF : 0 (0.00%)/0 (0.000 GiB, 0.00%) BGP : 0 (0.00%)/0 (0.000 GiB, 0.00%) RIP : 0 (0.00%)/0 (0.000 GiB, 0.00%) GRE : 0 (0.00%)/0 (0.000 GiB, 0.00%) IPIP : 0 (0.00%)/0 (0.000 GiB, 0.00%) Vxlan : 0 (0.00%)/0 (0.000 GiB, 0.00%) ERSPAN : 0 (0.00%)/0 (0.000 GiB, 0.00%) Cisco ISE : 0 (0.00%)/0 (0.000 GiB, 0.00%) VNTAG : 0 (0.00%)/0 (0.000 GiB, 0.00%)
User role
Admin, Monitor, or Operator
Command mode
Enable
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Network Security: Release 10.0