Use the CLI commands to enable or disable the CM Peer Service on each of the participating Central Management System appliances. When you disable the CM Peer Service on a Central Management System appliance, it can no longer interact with other CM peers.
Note
You can enable or disable CM Peer Service only using the CLI. CM Peer Service is enabled by default.
Important
You cannot make configuration changes when the CM Peer Service is disabled. If you want to make peer service configuration changes and enable the CM Peer Service later, use the cms peer-service enable command later.
Prerequisites
Admin access to the Central Management System appliance.
A connection to the Dynamic Threat Intelligence (DTI) Cloud.
Network connectivity over SSH (port 22) and HTTPS (port 443) must be allowed on each of the participating Central Management System appliances.
Central Management System (CMS) > Central Management System System Administration Guide Release 10.x > Appendices > Configuring the CM peer service > Enabling or disabling the CM Peer Service
Central Management System (CMS) > Central Management System System Administration Guide Release 10.x > Appendices > Configuring the CM peer service > Enabling or disabling all the features of the Central Management System Peer Service on the peers
Central Management System (CMS) > Central Management System System Administration Guide Release 10.x > Appendices > Configuring the CM peer service > Central Management System Peer Distributed Correlation