This is the first boot of your new IA.
You must accept the FireEye End User License Agreement before you can continue.
Press <return> to display EULA.
| Press the Enter key. Read the EULA at http://www.fireeye.com/company/legal. Press Q to leave this screen and proceed to the next screen.
|
Type "accept" to accept the agreement.
Type "eula" to review the EULA again. Type "no" if you do not accept the agreement.
*Typing "no" will cause the system to halt.
Do you accept the FireEye End User License Agreement?: accept
| Type one of the options the prompt presents. |
Configuring IA time preferences:
|
The current time zone is set to "UTC (UTC, +0000)"
Would you like to change the time zone? [y/N]: N
| Enter y to change the time zone from UTC or N to keep the UTC time zone. |
The current time is Mon Jul 25 17:08:17 UTC 2019
Would you like to change the time? [y/N]: N
| Enter y to change the displayed current time or N to keep the current time. |
Configuring IA network:
Pressing return without entering a new value will use the default values.
|
Hostname [ IA ]: IA -16
| Specify the host name. |
Fully qualified hostname []:
| (Optional): Specify the fully qualified domain name (FQDN). |
Configure network devices. DHCP or static devices with an IP address or Netmask will not be available for capture.
|
Configure ether1 interface?
[1/2/3]: 1
| Enter 1 or 2 to configure the first interface (for the management port, indicated by MGMT). Do not disable this interface.
|
Routable IP address (dotted quad)
[10.0.0.1]: 10.128.44.82
| If you entered 1 at the previous prompt, enter an accessible IPv4 address in the specified format. |
IPv4 netmask (dotted quad)
[255.255.255.0]: 255.255.255.0
| Enter the netmask for the IP address in the specified format. |
Routable IPv6 address []:
IPv6 prefix length []:
| Press Enter twice to skip this configuration. |
Configure ether2 interface?
[1/2/3]: 3
| Enter 3 to disable the second interface (for the capture port). |
Please select an available capture device- you may select up to 4 more (enter q if done selecting).
ether1 (has IP/NM)
ether2 (Available)
[2]: 2
| Configure the capture interface. If multiple interfaces are available, choose one contiguous to the management interface. |
Please select an available capture device - you may select up to 4 more (enter q if done selecting).
ether1 (has IP/NM)
ether2 (Available)
[2]: 2
| Configure the capture interface. If multiple interfaces are available, choose one contiguous to the management interface. |
IPv6 Gateway []:
| Press Enter to skip this configuration. |
Enter each DNS server on a separate line.
Blank line to exit
DNS server: 10.128.11.100
DNS Server:
| Enter each DNS server on a separate line. Press Enter when you are finished to proceed to the next prompt. |
Enter each Search domain on a separate line. Blank line to exit
Search domain: it.acme.com
Search domain:
| Enter each search domain on a separate line. Press Enter to proceed to the next prompt. |
Enter each NTP server on a separate line.
Blank line to exit.
NTP server: 0.pool.ntp.org
NTP server:
| Enter each NTP server on a separate line. Press Enter to proceed to the next prompt. |
HOSTNAME: IA -16
FQDN:
ether1: enabled, static
IPv4: 10.128.44.82
netmask: 255.255.255.0
IPv6: prefix length:
ether2: disabled
Capture Device: ["ether2"]
GW: 10.128.44.1
GW6:
DNS: 10.128.11.100
Search Domains: it.acme.com
NTP: 0.pool.ntp.org
SAN_ENABLED: false
Accept values as shown? [y/N]: y
| Review the information and then enter y to accept the values or N to return to the wizard and change them. |
Configured data storage found - rebuild required
Do you want to encrypt storage? [y/N]:
| Enter y. |
Would you like to change the npadmin, npscp, and c IA account password? [y/N]:
| Enter y to be prompted to change the password or N to accept the default password of "hammerhead" for these three accounts and change them later. |
Rebooting to apply the new settings.
... | Wait for the instance to finish rebooting. |