cmc appliance ＜applianceID＞ source port ＜port＞

Sets or removes the port the appliance will use to initiate client-initiated connections.

Note

This command is used to ensure that client-initiated connections are started from the expected port. If the port is set, the CMS will not accept client-initiated connections from this appliance from ports other than the once specified.

Syntax

[no] cmc appliance <applianceID> source port <port>

Parameters

no

Removes the previously added port. If no port is set, the system will not validate the connection based on the port used to initiate a connection.

<applianceID>

The unique appliance ID of the appliance to add.

<port>

The port the appliance will use to initiate client-initiated connections to the CMS appliance.

Example

The following example sets the source port to 32 for the appliance EX2400-3.

hostname (config) # cmc appliance EX2400-3 source port 32

The following example removes the port from the appliance EX2400-3.

hostname (config) # no cmc appliance EX2400-3 source port

User role

Admin

Command mode

Config

Supported appliances