icap-service interface

Allows the Network Security appliance to receive traffic sent over Internet Content Adaptation Protocol (ICAP) on either the ether1 or ether2 management interface.

For details about how to configure the settings for the ICAP service, see the "Configuring Threat Management" chapter of the Network Security User Guide.

Syntax

icap-service interface <interfaceName>

Parameters

<interfaceName>

Traffic sent over ICAP is received on the ether1 or ether2 management interface.

Example

The following example configures ether1 as the management interface to receive traffic sent over ICAP on the Network Security appliance.

hostname (config) # icap-service interface ether1

User role

Admin

Command mode

Config

Supported appliances

This command is supported on the following appliances running the specified releases or later:

Network Security: Release 8.3