Adds a TACACS+ server to the appliance configuration using the default port number (49). The TACACS+ server is enabled by default after it is added to the configuration. The no form of the command removes a TACACS+ server from the configuration.
Note
You can add multiple TACACS+ servers to an appliance. The appliance contacts the servers in the order in which they were added. If the first server in the list is unreachable, the appliance contacts the next server, and so on.
To configure multiple services on a single TACACS+ server, use the
tacacs-server host <ip address> auth-portcommand and specify a unique UDP port for each service.
Syntax
[no] tacacs-server host <ip address>
Parameters
no
Use the no form of this command to remove a TACACS+ server from the configuration.
ip address
Specify the IPv4 address of the TACACS+ server.
Examples
The following example adds a TACACS+ server to the configuration.
hostname (config) # tacacs-server host 172.16.1.1
The following example removes a TACACS+ server from the configuration.
hostname (config) # no tacacs-server host 172.16.1.1
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Malware Analysis: Before release 6.4
Central Management System: Before release 6.4
Email Security — Server: Before release 6.4
File Protect: Before release 6.4
Endpoint Security (HX): Release 2.5
Network Security: Before release 6.4