tacacs-server host ＜ip address＞ auth-port

Configures a TACACS+ server on the specified port. The default port is 49.

Note

To configure multiple services (accounting, authentication, and accounting) on a single TACACS+ server, use the tacacs-server host <ip address> auth-port command and specify a unique UDP port for each service.

This command overrides the global authentication port configured with the tacacs-server auth-port command.

Syntax

[no] tacacs-server host <ip address> auth-port <port number>

Parameters

no

Use the no form of this command to remove the TACACS+ server from the configuration.

ip address

Specify the IPv4 address of the TACACS+ server.

port number

Specify the UDP port number. The default is 49. Valid values are 1–65535.

Example

The following example sets 490 as the accounting port and 49 as the authentication port to use with the specified TACACS+ server.

hostname (config) # tacacs-server host 172.16.1.1 auth-port 490
hostname (config) # tacacs-server host 172.16.1.1 auth-port 49

User role

Admin

Command mode

Config

Supported appliances

This command is supported on the following appliances running the specified releases or later: