Maps an NTP authentication key to an NTP server.
Syntax
ntp server <server> authentication key <number>
Parameters
server
The hostname or the IPv4 or IPv6 address of the NTP server.
number
The key ID, which is an integer from 1-16.
Example
The following example maps the key with the ID of 8 to NTP server 0.acme.pool.ntp.org.
hostname (config) # ntp server 0.acme.pool.ntp.org authentication key 8 hostname (config) # show ntp configured NTP enabled: yes NTP Authentication: yes No NTP peers configured. NTP server 0.acme.pool.ntp.org Enabled: yes NTP version: 4 Key: 8 ...
Command mode
Config
Supported appliances
This command was released as follows:
Email Security — Server: Release 7.8.0
Network Security: Release 7.9
Central Management System: Release 7.9
Intelligent Virtual Execution - Server: Release 7.9