Checks end-to-end connectivity between the live ether1 or ether2 interface and the Internet. If a proxy server is configured for the live ether1 or ether2 interface checks connectivity between the proxy server and the Internet.
The appliance uses the live ether1 or ether2 interface if controlled live mode or URL dynamic analysis is enabled.
Important
Validate end-to-end connectivity before you enable controlled live mode or URL dynamic analysis. To perform this validation using the CLI, use the
analysis live check‑connectioncommand in configuration mode.
Syntax
analysis live check-connection
Parameters
None
Example
The following example shows that the connection between the live ether1 or ether2 interface and the Internet is not configured correctly:
hostname (config) # analysis live check-connection Data Interface not configured correctly. Download failed. Err: Timeout was reached
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Email Security — Server: Release 7.8. Support for the live ether1 interface was added in Release 8.0.
Intelligent Virtual Execution - Server: Release 9.0.0