Configures the live ether1 or ether2 data interface.
The appliance uses the live ether1 or ether2 interface if controlled live mode or URL dynamic analysis is enabled.
Note
You must also configure the default gateway and DNS name server for the live ether1 or ether2 interface.
Syntax
analysis live live-interface <interfaceName>
Parameters
interfaceName
Name of the live ether1 or ether2 data interface.
Example
The following example specifies that the live ether2 interface is configured:
hostname (config) # analysis live live-interface ether2
The following example specifies that the live ether1 interface is configured:
hostname (config) # analysis live live-interface ether1
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Email Security — Server: Release 8.0
Intelligent Virtual Execution - Server: Release 9.0.0