analysis live external ip

Configures the external IPv4 address and subnet mask or mask length of the live ether1 or ether2 data interface.

The appliance uses the live ether1 or ether2 interface if controlled live mode or URL dynamic analysis is enabled.

Note

You must also configure the default gateway and DNS name server for the live ether1 or ether2 interface.

Syntax

[no] analysis live external ip <ipAddress> <mask>

Parameters

<ipAddress>

External IPv4 address for the live ether1 or ether2 data interface.

<mask>

IPv4 address mask length (such as 255.255.255.0 or /24) of the live ether1 or ether2 data interface.

no

Use the no form of the command to clear the live ether1 or ether2 data interface IP address and mask length.

Example

The following example specifies that the live ether1 or ether2 interface configured at IPv4 address 172.16.0.0 in the /24 domain:

hostname (config) # analysis live external ip 172.16.0.0 255.255.255.0

User role

Admin

Command mode

Config

Supported appliances

This command is supported on the following appliances running the specified releases or later: