analysis live nameserver ip

Configures the IPv4 address of the Domain Name System (DNS) name server for the live ether1 or ether2 interface.

The appliance uses the live ether1 or ether2 interface if controlled live mode or URL dynamic analysis is enabled.

Syntax

[no] analysis live nameserver ip <ipAddress>

Parameters

<ipAddress>

IPv4 address of the DNS server for the live ether1 or ether2 data interface.

no

Use the no form of the command to clear the name server IP address.

Example

The following example specifies that the DNS name server is at IPv4 address 172.17.1.1:

hostname (config) # analysis live nameserver ip 172.17.1.1

User role

Admin

Command mode

Config

Supported appliances

This command is supported on the following appliances running the specified releases or later: