Configures proxy authentication credentials if the traffic between the live ether1 or ether2 interface and the Internet goes through an optional proxy server.
The appliance uses the live ether1 or ether2 interface if controlled live mode or URL dynamic analysis is enabled.
Syntax
[no] analysis live proxy-authentication <username> <password>
Parameters
<term><username></term>Username used to authenticate with the proxy server used for the live ether1 or ether2 interface.<term>
<password></term>Password used to authenticate with the proxy server used for the live ether1 or ether2 interface.<term>
no</term>Use the no form of the command to clear proxy authentication for the live ether1 or ether2 interface.
Example
The following example shows how to configure the proxy authentication settings for controlled live mode or URL dynamic analysis:
hostname (config) # analysis live proxy-authentication admin123 abcdefgh
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Email Security — Server: Release 7.8. Support for the live ether1 interface was added in Release 8.0.
Intelligent Virtual Execution - Server: Release 9.0.0